Jun 14, 2015

Photo transfer magic





One of my favorite DIY techniques is the photo transfer. It's relatively easy and it gives great results. 
Photo transfer allows you to make something fun, creative or sentimental from your favorite photos or images. These make great gifts as well J





All you need is:

  • photo-editing program (nothing fancy, most of the simple programs will do fine)
  • a digital photo (if you want to use an old photo, made before the digital era, you can scan it)
  • a laser printout of that photo / image (has to be LASER printout)
  • photo transfer medium (I use this one)
  • brush, scissors
  • surface you wish to transfer your photo onto (like canvas, wooden board, even textile)
  • Mod Podge


Step 1: Edit your photo. Do whatever you need to make it look as you want – crop it, enhance the color, contrast, brightness... Maybe you want to work with a black and white photo - these look nice because transfer is rarely perfect, so... B&W photo + little damages = pretty vintage masterpiece; if you know what I mean J
Additionally, you can reverse the photo. Because when you transfer your  photo, you will get the reversed image (keep that in mind). So, if you want to get the image of the original photo (facing the right way), you need to reverse it.
Don't forget to size the photo to fit on the surface you are transferring it onto.

Step 2: Print out your photo.  It has to be a laser print. So if you don't have a laser printer at home, you'll need to take it to a photo studio.  If you are working with a B&W photo, ask for a color print anyway – this will enhance the quality of your photo and the result will be better. Print the photo on a fairly thin paper, trust me, it will be easier later.

Step 3: Cut out the printout of the photo.

Step 4: Cover the surface with the photo transfer medium. Cover the top of the photo as well. Work fast because the medium dries fast.




Step 5: Lay your photo face-down on top of your chosen surface. Use something (e.g. a ruler, credit card, roller brush...) to smooth out and flatten any air bubbles underneath the photo.




Step 6: Let it dry.

Step 7: Now it gets messy. Get your fingers wet (or you can use a sponge / wet cloth, etc.). Rub the back of the photo with your wet fingers. Keep doing  this until you reveal the photo. Be careful and gentle – you need to get rid of the white paper fibers, but you don't want to destroy the photo.





Step 8: Let it dry.

Step 9: If you see any paper fibers that still need to be rubbed off,  repeat the step 6.

Step 10: Let it dry completely and seal your work with Mod Podge.







Here are some additional ideas:



Another canvas transfer



Photo transfer on a wooden board



Really proud of this one. It's a photo transfer on a textile bag. The procedure is the same, I just used the Mod Podge for textile to seal my work and I ironed the image over the baking paper (in order to make it resistant to washing).





Feb 22, 2015

Before the clock strikes midnight







Hello DIY lovers!

Today I would like to share one of my favorite projects. I really enjoyed working on it...plus it turned out to be really simple.
I found the inspiration for it in „Makery“, the DIY book I'dgotten for my birthday last year. It was the one thing that really caught my eye, and as soon as I've seen it, I thought of one of my friends and how good something like this would look in her apartment.





So here it is, my own version of a felt cuckoo clock.


Supplies:
thick felt (brown and some lighter color)
wooden board
clock mechanism
wool
- cotton balls
- hook for hanging pictures
- scissors
hot glue gun



Step 1: Shape a house out of a brown felt. I had to use two pieces because one wasn't big enough for a house that would cover the whole wooden board. I just cut off a part of the first piece turning it into the shape of a square. Then I placed the second piece horizontally and used the board as a guide for cutting out a roof. Finally, I cut out the hole where the clock mechanism will go.




Step 2: Make the leaves and a cuckoo bird out of a contrasting piece of felt. First, I drew the leaves and a bird on a piece of paper and cut the shapes out. Then I placed them on the yellow felt, traced the shapes with a pen and cut them out.




Step 3: Prepare the rest of the little pieces you may need. I made a pendulum out of wool and two cotton balls that I covered with the wool. I used the wool for some other details on the clock as well.


Step 4: Now that you prepared all the pieces you just need to put everything together. I just simply glued two pieces of the house on the wooden board and then glued all the little pieces on the house. (Note: I bought a board that already had a hole where the clock mechanism had to come. If your board doesn't have a hole, you'll need to drill one.)

Step 5: Assemble the clock mechanism by following the instructions on the package. Some mechanisms have the hook which can be used to hang the clock on the wall. This one doesn't so I glued the separate hook on the back of the clock...and that's it!

The clock is happily hanging on my friend's wall. :)









Jan 1, 2015

Ready for 2015!


http://www.pinterest.com/pin/357121445425242693/


New year, new beginning...
Each year we hope for a great year, the best so far, a year filled with happiness, success and fun moments that will become our greatest memories... No matter what the previous year was like – whether it was good or bad, we get the chance to start all over again, to make a change, to start something new. That's the magic of new beginnings!


I start every new year with a brand new planner that will help me organize all my upcoming responsibilities, events and ideas. And this year I decided to go with a DIY planner. To be honest, it was a lengthy project and it took more effort than I thought it will. But in the end, it turned out into one of my most special planners till date and I will proudly carry it around throughout the year.


For this project I decided to try something new – journal binding.
I started with preparing the pages. I didn't make my own planner templates because I found these free printables on http://www.thehandmadehome.net/2014/06/free-planner-and-calendar-more-2015/.
These are awesome, colorful and fun, and made my project a lot easier. The only „problem“ for me was their format – the smallest is A5, and I prefer my planner at least 2 times smaller. So I decided to print them out in a smaller format - which didn't really work. The major problem was that I couldn't get the smaller pages to overlap nicely when I printed them out two-sided. Then I tried to arrange them by using Microsoft Word, and this time it worked! Here is what I did:

1. I copied all pdf files to clipboard and pasted them as pictures in Word.

2. I resized all the files to the same size and arranged them on a page – I ended up having 4 smaller pages on one page. The sheets looked kinda like this:




Sheet for monthly / weekly pages



Sheet for monthly / weekly pages


Sheet for "weekly" pages


Sheet for "ideas" pages



The arrangement was made according to what I wanted to get when I print them out and cut the sheets in half. For an example, I needed "February" page to be printed on the back of the "January" page and "April" page on the back of the "March" page. In the same way, "Thursday to Sunday" page needed to come out on the back of "Monday to Wednesday" page. Also, I made a few pages with inspirational quotes from my collection of words on pinterest.

3. When I was satisfied with my new adapted templates, I printed them out, two-sided.




4. I cut the sheets in half. Since my bottom margin was bigger than the top one, I had to cut the excess of the paper on the bottom as well. So there was a lot of cutting. :/






5. Then I created 4 groups of pages - one is a mix of "monthly" and "weekly" pages, two contain only "weekly" pages and the last one contains "ideas" pages. I folded the pages in half, thus giving me my signatures and I was finally ready for the binding.







I won't describe the binding process, but here are the tutorials I used:





And here are the photos of the finished planner: 





Hmmm... Something is missing. Some polka dots, maybe :)



Yep, now it's much better!



And the inside...







2015, we are ready for you! :)